Winches up to 1 t

> Electric capstan winch SWE 500

It is normally used for short cable pulls which can no longer be executed manually. The two capstan wheels provide different forces and speeds. Use the optional back pull device to wind the pull rope directly on the reel.
The winch can be used for steel and fibre ropes. Cords can also be pulled directly. An electric motor is used for the drive. The winch is very handy and can be used practically everywhere.

Standard version	Increased pulling speed
Pulling force: 800/400 kp	Pulling force: 500/250 kp
Cable speed: 4/8 m/min.	Cable speed: 8/16 m/min.
Engine: 5.5 A; 0.75 kW	Engine: 7.5 A; 1.1 kW

PDF-File | page up

Dimensions (L x W x H):
54 x 38 x 62 cm
Weight: approx. 38 kg

> Cable Pulling Winch KZW 10

This winch is ideal for pre-roping (pulling-in the pull rope),

Calibrating, or pulling in ground or fiberglass cables at up to 12 kN.

The hydraulic drive always ensures maximum power, whether high force at low speed, or low force at high speed. The direct-drive capstan enables cable slackening or Manual pulling up to 16 kN (1.6 t). The quick-release wheels are ideal for easy transport.Fast reel change by means of a lifting plate enhances the flexibility of working with this machine. Free wheeling reel to pull out without starting the engine.

Standard version

Petrol engine Briggs & Stratton Vanguard 4.8 kW (6.5 HP) with electrical starters
Hydraulic stepless drive
Built-in relief valve with manometer
Safety cutout in case of oil failure
Centrifugal clutch cuts off hydraulic oil pump drive at low speeds
Unlockable reel with large capacity
Quick-release wheels for easy transport
Hand push rod
Rope guide
Drum change supporting mechanism
Interface for charger with charging status display
Battery charger
Lifting belt

Further Options

Electric motor 3 kW, 400 V, additional
Side-mounted capstan with 16 kN (1.6 to) pulling force
Diverse reel sizes
Measurement control PMC14S direct pull, indication of force, speed, length and Maximum cut-off contact
Measurement control PMC14S direct pull indication of force, speed, length, Maximum cut-off contact and registration USB2.0A
Remote control with cable

PDF-File | page up

Pulling force: Direct (Ø200): 12 kN (1.2 To), (Ø400): 6 kN (0.6 To), Via capstan: 16 kN (1.6 To)
Speed: Direct (Ø200): 35 m/min (max.), (Ø400): 70 m/min (max.), Via capstan: 27 m/min (max.)
Dimensions: Length: 127 cm, Width: 88 cm, Height: 80 cm
Weight without rope: Standard: 210 kg, With el. Motor 270 kg,
Rope Capacity, standard reel No. 5, Steel rope: Ø6 mm x 1200 m (144kg), Fibre rope: Ø5 mm x 1800 m (23kg)